Need a Fuel-It! Bluetooth ECA and/or harness for your GM, AC Delco, or Continental Ethanol Sensor?

You can purchase our Bluetooth ECA with us without any harness you may need as we now have a variety of harnesses and extensions to choose from.  All of our harnesses and extensions fit our Flex Fuel Analyzers and the GM, AC Delco, and Continental Style Ethanol Sensors.  

We now have the following options that can be purchased with or without our analyzer listed below...

Harnesses:

1.  24" (61cm) Harness with 1/4" ring terminals on the power and ground wires.  The signal wire is pinned with a d-sub pin for use with the JB4 or can be repined to meet your needs.

2.  48" (122cm) Harness with 1/4" ring terminals on the power and ground wires.  The signal wire is pinned with a d-sub pin for use with the JB4 or can be repined to meet your needs.

3.  90" (228cm) Harness with 1/4" ring terminals on the power and ground wires.  The signal wire is pinned with a d-sub pin for use with the JB4 or can be repined to meet your needs.

4.  108" (274cm) Harness with a 1/4" ring terminal for the ground, male bullet connector and wiretap for the power terminal.  The signal wire is pinned with a d-sub pin for use with the JB4 or can be repined to meet your needs.

7.  24" (61CM) Harness only, does not include any additional hardware or terminals.

Extensions:

5.  48" (122cm) Extension with one female connector that can connect to your Fuel-It! Ethanol Analyzer or Continental Style Ethanol Sensor.  The other end of the extension has one male connector that is the same as the Continental Style Ethanol Sensor and plugs into any Fuel-It! analyzer or harness.

6.  156" (396cm) Extension with one female connector that can connect to your Fuel-It! Ethanol Analyzer or Continental Style Ethanol Sensor.  The other end of the extension has one male connector that is the same as the Continental Style Ethanol Sensor and plugs into any Fuel-It! Analyzer or harness.

All our Bluetooth Analyzers include:

Bluetooth, Analog and Frequency output for JB4 or flash tuning

• Bluetooth:  To use this feature, the iPhone or Android app must be downloaded.
  
• If you are using an Apple product the app can be found by clicking here
• If you are using an Android product the app can be clicking here
• Analog:   All of our analyzers have an optional analog output of 0-5 volts or .5 to 4.5 volts with the white wire.  You can change this configuration under settings in our Fuel-It! app.
  
• Frequency:  If you need the raw signal directly from the ethanol sensor, you can change that setting in our Fuel-It! app as well. Here's a link to the video demonstration of that.  https://youtu.be/HUewBBWdI70?si=orCpD-MFyY-AjipN